Computing approximate blocking probabilities for transparent waveband switching based WDM networks using hierarchical cross-connects

An analytical model is presented to study the dynamics of wavelength division multiplexing (WDM) networks with waveband switching (WBS). The reduced load approximation method is considered to compute approximated network blocking probabilities in WBS-based WDM networks. The analytical model considers the link blocking probability due to insufficient link capacity and an impact of the waveband granularity (G). The analytical model also considers the node blocking probability due to unavailability of a switch port at the wavelength cross connect (WXC) layer of an Hierarchical cross connect (HXC) switch node. The set of nonlinear equations is obtained with the link independence assumption and solved using repeated substitutions. The accuracy of the analytical model is examined by comparing with simulation results considering the random-fit algorithm for waveband and wavelength assignments in different network scenarios. Lightpaths are routed between source and destination (s-d) HXC switch nodes using shortest path first (SPF) routing. An impact of the switch parameter to limit the input and the output WXC switch ports of an HXC switching node is also being investigated using the analytical model as well as through simulation results.     

Estimation of circulating bovine leukemia virus levels using conventional blood cell counts

Bovine leukemia virus (BLV) is widely prevalent in Japanese dairy farms. To control BLV infections in Japan, segregating or managing cows according to their proviral load (PVL) is a rational strategy. This study was conducted to establish a quantitative procedure for estimating blood PVL per microliter using a statistical model to offer a cost-effective alternative to the conventional quantitative real-time PCR method. In total, 250 Holstein cows infected with BLV were identified from 10 commercial dairy farms. Information on age was collected and blood samples were tested for white blood cell and lymphocyte counts and PVL using PCR. Generalized linear models with quasi-Poisson errors were used to estimate PVL by selecting age, logarithm of lymphocyte count, and their interaction term as explanatory variables. To evaluate the model, blood samples of 92 BLV-infected Holstein cows from 2 other commercial dairy farms were tested, and measured PVL values were compared with estimated PVL values by the model. The logPVL per microliter was modeled by positive associations with log lymphocyte count and age and a negative association with the interaction term. In the evaluation, measured PVL values had a strong correlation with estimated PVL values (Spearman's ρ = 0.87). In conclusion, our model provides a cost-effective and more rapid alternative to the conventional method to facilitate test and segregation or management of BLV-suspected cows.     

基于数据挖掘的开源电子资源访问行为统计模型

为了解决当前图书馆资源个性化推荐过程中存在推荐的准确率、召回率以及效率较低的问题,采用二维距离模型构建用户社区模型,用于描述访问用户与图书馆开源电子资源之间的关系,并对互联网用户需求和访问行为进行模糊规则推理.依据互联网用户属性和图书馆资源访问需求属性之间的模糊规则,建立图书馆开源电子资源访问行为统计模型,并利用该模型向用户提供个性化推荐服务.仿真结果表明,所建模型的推荐召回率高达98. 4%,推荐准确率为99. 2%,运行时间小于0. 04 s.所建模型能够为互联网用户提供准确、高效地图书馆资源个性化推荐服务.     

Automatic brain tissue segmentation in MR images using hybrid atlas forest based on confidence-weighted probability matrix

The segmentation of specific tissues in an MR brain image for quantitative analysis can assist the disease diagnosis and medical research. Therefore, a robust and accurate method for automatic segmentation is necessary. Atlas-based-method is a common and effective method of automatic segmentation where an atlas refers to a pair of image consist of an intensity image and its corresponding label image. Apart from the general multi-atlas-based methods, which propagate labels through the single atlas then fuse them, we proposed a hybrid atlas forest based on confidence-weighted probability matrix to consider the atlases set as a whole and treat each voxel differently. In the framework, we first register the atlas to the image space of target and calculate the confidence of voxels in the registered atlas. Then, a confidence-weighted probability matrix is generated and it augments to the intensity image of the atlas or target for providing spatial information of the target tissue. Third, a hybrid atlas forest is trained to gather the features and correlation information among the atlases in the dataset. Finally, the segmentation of the target tissues is predicted by the trained hybrid atlas forest. The segment performance and the components efficiency of the proposed method are evaluated on the two public datasets. Based on the experiment results and quantitative comparisons, our method can gather spatial information and correlation among the atlases to obtain an accurate segmentation.     

A side-sensitive synthetic coefficient of variation chart

Control charts for monitoring the coefficient of variation (γ) are useful for processes with an inconsistent mean (μ) and a standard deviation (σ) which changes with μ, by monitoring the consistency in the ratio σ over μ. The synthetic-γ chart is one of the charts proposed to monitor γ, and its attractiveness lie in waiting until a second point to fall outside the control limits before a decision is made. However, existing synthetic-γ charts do not differentiate between the points falling outside the upper control limit (UCL) and lower control limit (LCL). Hence, this paper proposes a side-sensitive synthetic-γ chart, where successive nonconforming samples must either fall above the UCL or below the LCL. Formulae to compute the average run length (ARL), the standard deviation of the run length (SDRL) and expected average run length (EARL) are derived using the Markov chain approach, and the algorithms to obtain the optimal charting parameters are proposed. Subsequently, the optimal charting parameters, ARL, SDRL and EARL values for various numerical examples are shown. Comparisons show that the side-sensitive synthetic-γ chart consistently outperforms the existing synthetic-γ chart, especially for small shifts. The proposed chart also consistently outperforms the Shewhart-γ chart, while showing comparable or better performance than the Exponentially Weighted Moving Average (EWMA) chart for most shift sizes, except for very small shifts. Finally, this paper shows the implementation of the proposed chart on an industrial example.     

Effects of upholstery materials on the burning behavior of real‐scale residential upholstered furniture mock‐ups

Fire spread and growth on real‐scale four cushion mock‐ups of residential upholstered furniture (RUF) were investigated with the goal of identifying whether changes in five classes of materials (barrier, flexible polyurethane foam, polyester fiber wrap, upholstery fabric, and sewing thread), referred to as factors, resulted in statistically significant changes in burning behavior. A fractional factorial experimental design plus practical considerations yielded a test matrix with 20 material combinations. Experiments were repeated a minimum of two times. Measurements included fire spread rates derived from video recordings and heat release rates (HRRs). A total of 13 experimental parameters (3 based on the videos and 10 on the HRR results), referred to as responses, characterized the measurements. Statistical analyses based on Main Effects Plots (main effects) and Block Plots (main effects and factor interactions) were used. The results showed that three of the factors resulted in statistically significant effects on varying numbers of the 13 responses. The Barrier and Fabric factors had the strongest main effects with roughly comparable magnitudes. Foam was statistically significant for fewer of the responses and its overall strength was weaker than for Barrier and Fabric. No statistically significant main effects were identified for Wrap or Thread. Multiple two‐term interactions between factors were identified as being statistically significant. The Barrier*Fabric interaction resulted in the highest number of and strongest statistically significant effects. The existence of two‐term interactions means that it will be necessary to consider their effects in approaches designed to predict the burning behavior of RUF.     

Advances in statistical mechanics of rock masses and its engineering applications

To efficiently link the continuum mechanics for rocks with the structural statistics of rock masses,a theoretical and methodological system called the statistical mechanics of rock masses(SMRM)was developed in the past three decades.In SMRM,equivalent continuum models of stressestrain relationship,strength and failure probability for jointed rock masses were established,which were based on the geometric probability models characterising the rock mass structure.This follows the statistical physics,the continuum mechanics,the fracture mechanics and the weakest link hypothesis.A general constitutive model and complete stressestrain models under compressive and shear conditions were also developed as the derivatives of the SMRM theory.An SMRM calculation system was then developed to provide fast and precise solutions for parameter estimations of rock masses,such as full-direction rock quality designation(RQD),elastic modulus,Coulomb compressive strength,rock mass quality rating,and Poisson’s ratio and shear strength.The constitutive equations involved in SMRM were integrated into a FLAC3D based numerical module to apply for engineering rock masses.It is also capable of analysing the complete deformation of rock masses and active reinforcement of engineering rock masses.Examples of engineering applications of SMRM were presented,including a rock mass at QBT hydropower station in northwestern China,a dam slope of Zongo II hydropower station in D.R.Congo,an open-pit mine in Dexing,China,an underground powerhouse of Jinping I hydropower station in southwestern China,and a typical circular tunnel in Lanzhou-Chongqing railway,China.These applications verified the reliability of the SMRM and demonstrated its applicability to broad engineering issues associated with jointed rock masses.     

Two successive occasions resubmitted sampling scheme-based control chart

In this paper, a resubmitted sampling-based successive sampling over two successive occasions control chart is proposed to monitor the underlying characteristic of interest. Auxiliary information of the first occasion is utilized to monitor the relative change in the study variable over the second occasion successively despite high degree of correlation. The structural and operational design is presented along with the comparative performance evaluation. The average run length is used as a performance evaluation measure and proved the argument in favor of the presented concept in comparison with the other auxiliary data control charts. The implementation is explained through two real examples.     

Analyzing Dynamic Change in Social Network Based on Distribution-Free Multivariate Process Control Method

Social organizations can be represented by social network because it can mathematically quantify and represent complex interrelated organizational behavior. Exploring the change in dynamic social network is essential for the situation awareness of the corresponding social organization. Social network usually evolves gradually and slightly, which is hard to be noticed. The statistical process control techniques in industry field have been used to distinguish the statistically significant change of social network. But the original method is narrowed due to some limitation on measures. This paper presents a generic framework to address the change detection problem in dynamic social network and introduces a distribution-free multivariate control charts to supervise the changing of social network. Three groups of network parameters are integrated together in order to achieve a comprehensive view of the dynamic tendency. The proposed approaches handle the non-Gaussian data based on categorizing and ranking. Experiments indicate that nonparametric multivariate procedure is promising to be applied to social network analysis.